Please note this item is not eligible for further discounts
Z2 CPAP is perfect for travel because it is lightweight, auto adjusting and ultra small.
Breas Z2 Auto Travel CPAP Machine Overview
The Breas (formerly HDM) Z2 CPAP machine is a quieter version of its predecessor Z1 CPAP with additional improved features, an auto start & stop button, and an algorithm for a comfortable CPAP therapy. The addition of Q-Tube to the Breas Z2 CPAP machine ensures lower noise levels even in higher pressures.
The machine is sized 6.48” x 3.30” x 2.02” and weighs 10.5 oz. Take your CPAP therapy with you on the go with the Breas Z2 Portable CPAP machine.
The Breas Z2 is compatible with all CPAP masks and standard tubing without the need of any special mask making the machine the right choice for you. The Z2 is not compatible with heated tubing.
The exclusive breathing algorithm and sampling rate of several times per second of the Breas Z2 Auto CPAP delivers an overall lower average airflow pressure compared to a fixed-pressure CPAP machine. The Breas Z2 automatically adjusts the CPAP pressure in sync with your breathing while you sleep.
Breas Z2 Auto CPAP Auto Start / Stop Feature
The Z2 has a function that allows it to start and stop automatically. When the mask is put on the face and you begin to breathe, this function will automatically begin the therapy. When the mask is removed, the therapy will come to an end. Replace the mask on your face and begin breathing through it to continue the therapy.
Integrated Battery Option
For travel off the grid or where power is limited, add on the optional PowerShell® for a fully integrated battery option. The PowerShell’s Extended Life Battery is a rechargeable, lithium-ion battery that provides a full night’s therapy on a single charge.
Z-Breathe Comfort Feature
One of the most common complaints by CPAP users is the effort it takes for respiration against the CPAP machine’s exerted pressure. To make it easier to exhale, the Z-Breathe technology temporarily reduces the pressure during exhalation. There are 3 airflow settings for patients to personalize their air flow.
HME – Waterless Humidification
The Z2 comes with a small, portable humidification cartridge called an HME (Heat Moisture Exchanger). When inserted between the hose and the mask, it captures the moisture in the exhaled breath and releases it on the inhaled breath. It does not require any electricity or additional water. The HME eliminates the disadvantages associated with electrical humidification systems by not using electricity or complicated moving parts.
Connect the HME’s large diameter end to your mask and the smaller diameter end to your CPAP Tube to complete the installation. Double-check that both connections are properly placed and secured. To extend the life of the HME, store it in a sealed plastic bag between usage. After 7 days or when it is no longer humidifying, throw it away.
Breas Z2 Auto CPAP Machine Ramp Mode
The Breas Z2 provides users with a Ramp Mode, allowing them to easily fall asleep as their CPAP machine ramps up to the prescribed therapy pressure. Make sure the machine is in standby mode before adjusting ramp settings. Ramp pressure can be selected by holding the Z2’s Down arrow until the display begins to flash. Use the Up and Down arrows to select the desired ramp pressure, then press and hold the power button to save the setting. Set the ramp time using the same steps after holding down the Up arrow on the Breas Z2.
Breas Z2 Auto Travel CPAP Machine Qtube Muffler
The Qtube is a reusable single-patient attachment that reduces acoustic noise that can be conveyed to the patient mask via the CPAP tube. With standard end fittings, the Qtube may be used with any normal (22mm) or slim-style (15mm) CPAP tube. The foam baffling material is already put in the Qtube, so it’s ready to use right away.
The Breas Z2 Auto CPAP follows RTCA/DO-160, Section 21, Category M and achieves FAA compliance for use on aircraft. To maintain airplane compliance when in the air, the machine bluetooth should be kept turned off like other mobile devices.
Breas Z2 Auto Travel CPAP Machine – Includes
- Z2 Auto Device
- 4 foot Slim Style Z1/Z2 Tube
- Heat Moisture Exchange Unit
- Tube Adapter for Z1/Z2 Machines
- Q-Tube In-Line CPAP Muffler Kit
- (2) Disposable Filters
- USB Cable
- AC Power Supply
We do not accept returns on any CPAP/BiPAP machines. For more information, read our return policy.